Epoxy.com Product #235
Chemical Resistant Epoxy Tile Grout and Adhesive
DESCRIPTION
Epoxy.com Product #235
Chemical Resistant Tile Grout and Adhesive is a highly chemical
resistant, industrial grade, Novolac epoxy grout for ceramic tile,
quarry tile, brick pavers, and stone. Epoxy.com Product #235
Chemical Resistant Tile Grout and Adhesive is supplied in
pre-packaged kits containing resin, hardener, and mineral fillers
that produce a dense, uniform seal. Typical applications for
Epoxy.com Product #235 Chemical Resistant Tile Grout and Adhesive
require superior resistance to thermal shock, chemicals, and heavy
traffic found in the harsh environments of dairies, bakeries,
meat packers, breweries, canneries, bottlers, distilleries,
and pharmaceutical plants.
ADVANTAGES
- Highly chemical and temperature resistant
- Low odor for use in occupied areas
- Low viscosity - good wetting properties
- Exceeds ANSI A-118.3 Specification for chemical resistant, water cleanable epoxy grout
- Cures at cold temperatures
- User-friendly packaging
- Versatile for both setting and grouting all types of tile
- USDA approvable
CONSIDERATIONS
- Minimum application temperature of 50°F (Contact Epoxy.com for Low Temperature Cure).
- Substrate must be free of curing agents and any foreign materials.
- Some tiles and pavers can be stained by color pigments in Epoxy.com Product #235 Chemical Resistant Tile Grout and Adhesive.
- Try small area to determine results prior to grouting entire surface.
- Protect from exposure to chemicals and harsh cleaners until fully cured.
APPLICATION
SURFACE PREPARATION
Before grouting, clean joints and the tile surface with a damp
sponge to remove dust, dirt, and other contaminants. Do not leave water standing in joints.
Do not clean tiles with acid cleaners.
MIXING
Empty entire contents of Part A and Part B into a clean mixing pail.
With a slow speed drill or margin trowel, mix until liquids are completely blended. Add at
least of Epoxy.com Product #235 GROUT FILLER (more for wider joints) and blend to uniform.
INSTALLATION
Immediately pour Epoxy.com Product #235 mixture from mixing pail
onto working area. Following standard epoxy and grouting techniques, apply
Epoxy.com Product #235 to surface. Be sure all grout joints arecompletely filled.Remove
excess grout with grout float. Do not leave excess grout on face of tiles.
Consult Epoxy.com for more detailed installation and cleaning instructions.
COMPOSITION
100% solids epoxy-Novolac grout.
COLOR
Grey, Black, and Clear. Custom colors available on request
PACKAGING
1 GALLON and 5 GALLON units consisting of premeasured amounts of
resin, hardener, and filler.
CHEMICAL RESISTANCE
| REAGENT | RATING |
| Lactic Acid-85% | R |
| Acetic Acid-10% | R |
| Formic Acid-5% | R |
| Citric Acid-50% | R |
| Tartaric Acid-50% | R |
| Tannic Acid-50% | R |
| Olejic Acid-50% | R |
| Phosphoric Acid-80% | R |
| Hydrofluoric Acid-10% | R* |
| Sulfuric Acid-50% | R* |
| Nitric Acid-20% | R* |
| Hydrochloric Acid-36.5% | R* |
| Bleach | R |
| Sodium Hydroxide | R |
| Xylene | R |
| Ethyl Alcohol | R |
| Mineral Spirits |
R |
| Toluene |
R |
| Methylene Chloride |
NR |
R = Recommended for continuous service.
R* = Extended Exposure may cause stain.
L = Limited recommendation, occasional spills.
NR = Not Recommended
Chemical Resistance determined in accordance with ASTM C267-1982
Installation Properties
| Working Life |
25 minutes |
| Initial Set Time |
4 hours
| Dry Time @ 70 degrees F
| Full Set Time |
Overnight |
| Full Chemical Cure |
5 -10 days |
PERFORMANCE PROPERTIES
| Tensile Strength |
ASTM C-307 |
2,000 to
2,500 psi |
| Compressive Strength |
ASTM C-579 |
15,000 psi |
| Flexural Strength |
ASTM C-580 |
3,800 to 4,100 psi |
| Water Absorption |
24 hours |
0.15% |
| Heat Resistance |
|
190 degrees F. continuous
325 degrees F. intermittent |
| Adhesion to Concrete |
ASTM C-321 |
350 to 400 psi |
|
|
Proper mixing and installation is critical to the optimal success
of all product. See
Installation Tips,
Techdata, &
MSDS for more details on our products.
Be sure to contact us with any questions and/or concerns that you
have.
For more information please contact:
Epoxy.com
A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Over
350 products,
Since 1980
Florida & Vermont
USA
Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time).
Closed 12Noon-1PM Eastern Time for Lunch
321-206-1833 Customer Service - Ordering and Order Status
Katey Fontaine, VP - Customer Service Director
sales@epoxy.com
714-657-3826 Technical Support
352-533-2167 Norm Lambert, President - Technical Support Director
info@epoxy.com
352-489-1666 Accounting and Administration
Debby Lambert, CEO, and CFO
office@epoxy.com
352-489-1625 Fax line to all Departments
www.epoxy.com
24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253
| We accept MasterCard, Visa, American Express, Discover,
or Wire Transfers. |
Copyright © 1994-2010 EPOXY.COM
a division of Epoxy Systems, Inc. -
Florida and Vermont. All rights reserved.
Unless
other wise agreed upon in writing, buyer is responsible for the cost of
shipping.
This
information is presented in good faith to assist in determining whether this
product is suitable for application. No warranty or representation, however, is
intended or made, nor is protection from any law or patent to be inferred, and
all patent rights reserved.
Epoxy.com a
division of Epoxy Systems, Inc. warrants its products (when
properly stored) for the period of time as follows: Epoxies, Product
#315, Product #315BC, and Product #316 one (1) year; Polyesters,
Methyl Methacrylates (normal) two (2) months and Polyurethanes Four
(4) months; Power Tools and Equipment 90 days; Vinyl Esters,
High Molecular Weight Methacrylates (HMMA) and all other
resins (not specifically mentioned above) 30 days; hand tools
(non-power tools) 30 days. Epoxy.com warrants that its
products will be free of manufacturing defects and will be in
conformity with published specifications when handled, stored, mixed
and applied in accordance with recommendations of Epoxy.com. If any
product fails to meet this warranty, the liability of Epoxy.com will
be limited to replacement of any non-conforming material if notice
of such non-conformity is given to Epoxy.com within the warranty
period for the material (as indicated above), or within 1 year of
the delivery of materials (whichever is sooner). Epoxy.com may in
its discretion refund the price received by Epoxy.com in lieu of
replacing the material. No customer, distributor, or representative
of Epoxy.com is authorized to change or modify the published
specifications of this warranty in any way. No one is authorized to
make oral warranties on behalf of Epoxy.com. In order to obtain
replacement or refund the customer must provide written notice
containing full details of the non-conformity. Epoxy.com reserves
the right to inspect the non-conforming material prior to
replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE
ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT
LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR
PURPOSE. Epoxy.com 'S OBLIGATION SHALL NOT EXTEND BEYOND THE
OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND Epoxy.com SHALL
HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD
PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER
DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All
quotes and sales subject to availability.
Many of our
products are made on an individual order basis. Unless
authorized in writing by Epoxy.com a division of Epoxy Systems, Inc.
in writing before the material is made, there are no returns on
items purchased from us, once the order has been processed, and the
material made. In the event of authorized returns a restocking
charge will be charged in the amount of 30% of the value of the
material returned or $150 whichever is greater. No returns on
non-list priced items. All Returns are for merchandise (store)
credit only, no cash or credit card credits. In the event of a
return, buyer is responsible for the cost of shipping and handling
in both directions.
[Tech Data Sheets in Acrobat Format]
[MSDS in Acrobat Format]
[Online Ordering Authorization Form]
|