Epoxy.com Product #402
Two Component Chemical Resistant Polyurethane Coating
GENERAL DESCRIPTION
Epoxy.com PRODUCT #402 Chemical Resistant Polyurethane
Coating is a two component chemical
resistant polyurethane coating. The high gloss finish offers
excellent abrasion resistance, chemical and stain resistance, and
color retention.
Epoxy.com PRODUCT #402 Chemical Resistant Polyurethane
Coating can be used equally well on
vertical or horizontal surfaces. It is ideal for concrete floors and
walls in warehouses, storage facilities, aircraft hangers, animal
housing, and vehicle maintenance facilities.
Epoxy.com PRODUCT #402 Chemical Resistant Polyurethane
Coating is not for use in California
ADVANTAGES
- Excellent Abrasion Resistance
- Excellent Chemical Resistance
- UV Resistant - means a long life even in direct sunlight
- Excellent Color Stability - Pigmented Version
- Clear Version Resists Ambering Even in the Brightest Sunlight
- Exterior and Interior Uses
- May be used on both Horizontal and Vertical Applications
Epoxy.com Product #402
Clear
Over Chip Flooring - On Outside Patio
Picture Courtesy of AA Permacoat
Used with Permission - All Rights Reserved
SURFACE PREPARATION
Surface must be clean and sound. Remove all dirt, laitance, grease
curing compounds and other foreign matter by sandblasting, or
mechanical abrasion. Remove water and dust from all surfaces with an
oil-free blast immediately prior to application.
APPLICATION
Prime: For best bond to properly prepared surface,
use Epoxy.com
Product #899 Primer.
Body: Apply
Epoxy.com PRODUCT #402 Chemical Resistant Polyurethane
Coating
with brush, roller (short napped), or squeegee followed with back
rolling to get recommended thickness (3 mils DFT).
Finish: Apply top coat as required (minimum 3 mils
DFT).
Epoxy.com PRODUCT #402 Chemical Resistant Polyurethane
Coating is also available in the
following forms:
- As a slip or skid resistant finish using a non-skid additive in
the finish.
- As an electrostatic dissipating finish version -
Epoxy.com Product #675
LIMITATIONS
Surface to receive
Epoxy.com PRODUCT #402 Chemical Resistant Polyurethane
Coating must be dry. Minimum application temperature of 40°F
(Contact Epoxy.com Technical Support for Low Temperature Cure).
Maximum application temperature of 100°F. Avoid
applications on surfaces without effective vapor barriers.
SAFETY PRECAUTIONS
Prolonged or repeated exposure may cause eye and
skin irritation. If contact occurs, wash immediately and seek
medical help. Use safety glasses with side shields and wear
protective rubber gloves.
CLEANING
All tools and equipment should be cleaned before the system gels.
Use MEK, Acetone, or any lacquer solvent.
Physical Properties
|
|
Color
|
Standard colors for this product are:
Clear (satin and gloss), White #001,
Light Gray #100, White Sand #210,
Taupe #300,Mocha #400, Caramel #420,
& Brick Red #900.
|
|
Gloss, 60°F
|
85-100
|
|
Mix Ratio
|
2Ato 1B by volume
|
|
Pot Life
|
30-40 minutes @ 70°F
|
|
VOC
|
405 gm/liter
|
|
Solids Content, % volume
|
56.0
|
|
Coverage
|
300 ft2/gal @ 3 mils DFT
|
DRY TIME
|
|
10-20 mil film
|
1O~14 hrs
|
|
Light Traffic
|
16 hrs
|
Ultimate Cure @ 74°F
@50°F
|
5 days
14davs
|
CHEMICAL RESISTANCE
|
REAGENT
|
Rating
|
REAGENT
|
Rating
|
|
Acetic Acid-5%
|
L
|
Iodine
|
R
|
|
Acetone
|
L
|
Lactic Acid-15%
|
R
|
|
Betadine
|
R
|
Methyl Ethyl Ketone
|
L
|
|
Bleach
|
L
|
Nitric Acid-10%
|
R
|
|
Citric Acid-30%
|
R
|
Skydrol
|
R
|
|
Crude Oil
|
R
|
Sodium Hydroxid-50%
|
R
|
|
Diesel Fuel
|
R
|
Sulfuric Acid-20%
|
R
|
|
Ethylene Glycol
|
R
|
Toluene
|
R
|
|
Fafty Acids
|
L
|
Urea
|
R
|
|
Gasoline
|
R
|
Vinegar
|
L
|
|
Hydrochloric Acid-15%
|
R
|
Xylene
|
R
|
R= Recommended for continuous Service
L=Limited recommendation, occasional spills
|
PERFORMANCE PROPERTIES
|
|
Adhesion to concrete ACI Committee 403
|
200 psi (concrete fails)
|
|
Abrasion Resistance ASTM-C501
|
30-40 mg loss
(CS-17 wheel, 1 kg load, 1000 cycles)
|
|
Service Temperature MIL- D-3134F
|
160°F (immersion) 250°F (dry heat)
|
|
Impact Resistance MTI-D-3134F § 4.7.5
|
Withstands 16ft./lbs. no cracking, delamination or chipping
|
|
Elevated Temperature Resistance MIL-D-3134F § 4.7.3
|
No slip or flow at required temperatures at 158°F
|
|
Water Absorption (24. hr. immersion) ASTM-D-670-63
|
0.10% maximum
|
|
Hardness ASTM D3363 |
2H± |
 Standard colors
for this product are: White #001, Light Gray #100, White Sand #210,
Taupe #300, Mocha #400, Caramel #420, & Brick Red #900. The other
colors listed to the left are available on on orders of 30 gallons
or more.
Click the picture
of color card below for a larger version of this picture of the
color chart.
Please
note:
The picture to the right is a photographic reproduction of the
color card for this product. The photo reproduction process and
your monitor and/or printer will change these colors. This chart is
to give you an idea of the colors available and not intended for
critical color selections.
Download this file in
Adobe Acrobat format for formal presentation.
|
|
Proper mixing and installation is critical to the optimal success
of all product. See
Installation Tips,
Techdata, &
MSDS for more details on our products.
Be sure to contact us with any questions and/or concerns that you
have.
For more information please contact:
Epoxy.com
A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Over
350 products,
Since 1980
Florida & Vermont
USA
Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time).
Closed 12Noon-1PM Eastern Time for Lunch
321-206-1833 Customer Service - Ordering and Order Status
Katey Fontaine, VP - Customer Service Director
sales@epoxy.com
714-657-3826 Technical Support
352-533-2167 Norm Lambert, President - Technical Support Director
info@epoxy.com
352-489-1666 Accounting and Administration
Debby Lambert, CEO, and CFO
office@epoxy.com
352-489-1625 Fax line to all Departments
www.epoxy.com
24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253
| We accept MasterCard, Visa, American Express, Discover,
or Wire Transfers. |
Copyright © 1994-2010 EPOXY.COM
a division of Epoxy Systems, Inc. -
Florida and Vermont. All rights reserved.
Unless
other wise agreed upon in writing, buyer is responsible for the cost of
shipping.
This
information is presented in good faith to assist in determining whether this
product is suitable for application. No warranty or representation, however, is
intended or made, nor is protection from any law or patent to be inferred, and
all patent rights reserved.
Epoxy.com a
division of Epoxy Systems, Inc. warrants its products (when
properly stored) for the period of time as follows: Epoxies, Product
#315, Product #315BC, and Product #316 one (1) year; Polyesters,
Methyl Methacrylates (normal) two (2) months and Polyurethanes Four
(4) months; Power Tools and Equipment 90 days; Vinyl Esters,
High Molecular Weight Methacrylates (HMMA) and all other
resins (not specifically mentioned above) 30 days; hand tools
(non-power tools) 30 days. Epoxy.com warrants that its
products will be free of manufacturing defects and will be in
conformity with published specifications when handled, stored, mixed
and applied in accordance with recommendations of Epoxy.com. If any
product fails to meet this warranty, the liability of Epoxy.com will
be limited to replacement of any non-conforming material if notice
of such non-conformity is given to Epoxy.com within the warranty
period for the material (as indicated above), or within 1 year of
the delivery of materials (whichever is sooner). Epoxy.com may in
its discretion refund the price received by Epoxy.com in lieu of
replacing the material. No customer, distributor, or representative
of Epoxy.com is authorized to change or modify the published
specifications of this warranty in any way. No one is authorized to
make oral warranties on behalf of Epoxy.com. In order to obtain
replacement or refund the customer must provide written notice
containing full details of the non-conformity. Epoxy.com reserves
the right to inspect the non-conforming material prior to
replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE
ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT
LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR
PURPOSE. Epoxy.com 'S OBLIGATION SHALL NOT EXTEND BEYOND THE
OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND Epoxy.com SHALL
HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD
PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER
DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All
quotes and sales subject to availability.
Many of our
products are made on an individual order basis. Unless
authorized in writing by Epoxy.com a division of Epoxy Systems, Inc.
in writing before the material is made, there are no returns on
items purchased from us, once the order has been processed, and the
material made. In the event of authorized returns a restocking
charge will be charged in the amount of 30% of the value of the
material returned or $150 whichever is greater. No returns on
non-list priced items. All Returns are for merchandise (store)
credit only, no cash or credit card credits. In the event of a
return, buyer is responsible for the cost of shipping and handling
in both directions.
[Tech Data Sheets in Acrobat Format]
[MSDS in Acrobat Format]
[Online Ordering Authorization Form]
|