Epoxy.com Product #954
Two Component Self Leveling Urethane
Jet Fuel Resistant Joint Sealant
DESCRIPTION:
Epoxy.com Product #954 Joint Sealant is a two component extended
polyurethane elastomer self-leveling joint sealant for joints in concrete,
asphalt, or metal. When poured into a horizontal joint, Epoxy.com Product
#954 is an excellent elastomeric joint sealer with "great memory".
Epoxy.com Product #954 is also available for machine mixing.
Epoxy.com Product #954 may be used as a relief joint by mixing it with
one part by volume of Epoxy.com Product #75 Filler.
ADVANTAGES:
- Easy to use: Epoxy.com Product #954 is manufactured in a
convenient 1:1 mix ratio by volume.
- Pourable & Self Leveling: With extremely good flow. No special
equipment is required for most applications.
- Rapid Cure: Tack free in less than 4 hours at 75°F. Prevents delay
in opening joints to traffic.
- Excellent Bond: Holds bond even after immersion in water or jet
fuel. No loss in adhesion in below freezing temperatures.
- Good Tear Resistance: Cured material is tough and resists
puncture and tearing by sharp objects.
- Flame & Fuel Resistant: Does not ignite, flow, or drip when
subjected to flame test. Does not swell or soften when exposed to jet
fuel.
SPECIFICATIONS:
ASTM C-920, Type M, Grade P, Class 25, Use T, NT and M.
Federal Specification SS-S195B (St. of Maryland)
Federal Specification SS-S200D (Jet Fuel Resistant)
JOINT PREPARATION:
Clean all surfaces of oil, grease, curing compound, residue, rust, or
other foreign materials by sandblasting or mechanical blasting. Remove loose
particles by oil-free compressed air or vacuum. Joint slot surfaces must be
dry at time of application. Apply masking tape along edges of joint slot for
neat, straight edges. Remove tape immediately after sealant levels.
MIXING:
Mix components A & B separately for 2 to 3 minutes, then mix one part of
A to one part of B by volume. Mix at medium speed with mixing paddle, moving
paddle from top to bottom and around sides of container to insure thorough
and complete mixing. Suggested mixing time for 2 gallon units is 4 minutes;
5 minutes for 10 gallon units.
APPLICATION:
Pour mixed Epoxy.com Product #954 into joint slot from the
container or from a metal or plastic watering can after removing the
sprinkler head. For large jobs, automatic metering, mixing and/or placing
equipment may be used.
COVERAGE:
One gallon of Epoxy.com Product #954 fills 231 cu. in. of joint or
75 LF of 1/2" x 1/2" joint. Primer is required on steel. Primer is not
required on concrete and other porous materials.
PACKAGING:
Epoxy.com Product #954 is packaged in 10 gallon.
LIMITATIONS:
Joint slots must be dry. Shelf life is 6 months for Epoxy.com Product
#954. Do not dilute Epoxy.com Product #954.
CAUTION:
Epoxy.com Product #954 contains coal, tar, and organic
isocyanates. These are considered irritants. Provide adequate ventilation.
Contact with skin or eyes must be avoided. Wear protective clothing,
goggles, gloves, and/or barrier creams. Wash thoroughly with soap and water
or a waterless skin cleaner prior to smoking or eating. In case of contact
with eyes, flush immediately with water and contact a physician. If
swallowed, call a physician immediately.
PROPERTIES:
| Color |
Mixed - Black |
| Viscosity |
6,000-10,000 cps |
| Approx. effect of temperature |
60°F |
70°F |
90°F |
| Pot Life |
25 min |
20 min |
15 min |
| Tack-Free Time |
4 hrs |
3 hrs |
2 hrs |
| Shore A Hardness @ 72 hrs max |
25 +/- 5 |
25 +/- 5 |
25 +/- 5 |
FOR INDUSTRIAL USE ONLY. KEEP AWAY FROM CHILDREN.
|
|
Proper mixing and installation is critical to the optimal success
of all product. See
Installation Tips,
Techdata, &
MSDS for more details on our products.
Be sure to contact us with any questions and/or concerns that you
have.
For more information please contact:
Epoxy.com
A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Over
350 products,
Since 1980
Florida & Vermont
USA
Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time).
Closed 12Noon-1PM Eastern Time for Lunch
321-206-1833 Customer Service - Ordering and Order Status
Katey Fontaine, VP - Customer Service Director
sales@epoxy.com
714-657-3826 Technical Support
352-533-2167 Norm Lambert, President - Technical Support Director
info@epoxy.com
352-489-1666 Accounting and Administration
Debby Lambert, CEO, and CFO
office@epoxy.com
352-489-1625 Fax line to all Departments
www.epoxy.com
24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253
| We accept MasterCard, Visa, American Express, Discover,
or Wire Transfers. |
Copyright © 1994-2010 EPOXY.COM
a division of Epoxy Systems, Inc. -
Florida and Vermont. All rights reserved.
Unless
other wise agreed upon in writing, buyer is responsible for the cost of
shipping.
This
information is presented in good faith to assist in determining whether this
product is suitable for application. No warranty or representation, however, is
intended or made, nor is protection from any law or patent to be inferred, and
all patent rights reserved.
Epoxy.com a
division of Epoxy Systems, Inc. warrants its products (when
properly stored) for the period of time as follows: Epoxies, Product
#315, Product #315BC, and Product #316 one (1) year; Polyesters,
Methyl Methacrylates (normal) two (2) months and Polyurethanes Four
(4) months; Power Tools and Equipment 90 days; Vinyl Esters,
High Molecular Weight Methacrylates (HMMA) and all other
resins (not specifically mentioned above) 30 days; hand tools
(non-power tools) 30 days. Epoxy.com warrants that its
products will be free of manufacturing defects and will be in
conformity with published specifications when handled, stored, mixed
and applied in accordance with recommendations of Epoxy.com. If any
product fails to meet this warranty, the liability of Epoxy.com will
be limited to replacement of any non-conforming material if notice
of such non-conformity is given to Epoxy.com within the warranty
period for the material (as indicated above), or within 1 year of
the delivery of materials (whichever is sooner). Epoxy.com may in
its discretion refund the price received by Epoxy.com in lieu of
replacing the material. No customer, distributor, or representative
of Epoxy.com is authorized to change or modify the published
specifications of this warranty in any way. No one is authorized to
make oral warranties on behalf of Epoxy.com. In order to obtain
replacement or refund the customer must provide written notice
containing full details of the non-conformity. Epoxy.com reserves
the right to inspect the non-conforming material prior to
replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE
ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT
LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR
PURPOSE. Epoxy.com 'S OBLIGATION SHALL NOT EXTEND BEYOND THE
OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND Epoxy.com SHALL
HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD
PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER
DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All
quotes and sales subject to availability.
Many of our
products are made on an individual order basis. Unless
authorized in writing by Epoxy.com a division of Epoxy Systems, Inc.
in writing before the material is made, there are no returns on
items purchased from us, once the order has been processed, and the
material made. In the event of authorized returns a restocking
charge will be charged in the amount of 30% of the value of the
material returned or $150 whichever is greater. No returns on
non-list priced items. All Returns are for merchandise (store)
credit only, no cash or credit card credits. In the event of a
return, buyer is responsible for the cost of shipping and handling
in both directions.
[Tech Data Sheets in Acrobat Format]
[MSDS in Acrobat Format]
[Online Ordering Authorization Form]
|