Chemical Resistant Resin Systems:
Epoxy, Polyurea, Polysulfide and Vinyl Ester Systems

Chemical Resistance and Chemical Containment  

• Epoxy - Chemical Resistant

  	Epoxy.com Product #2 Chemical Resistant Coating - a two component, 100% solids epoxy chemical resistant coating used to protect chemical concrete, steel and other structural materials from non-oxidizing acids and alkalines for both interior and exterior applications. Available in normal, fast, and Cold Temperature Cure.
  	Epoxy.com Product #2 Fast - Shorter Potlife, and faster setting version of Product #2 Chemical Resistant Coating
  	Epoxy.com Product #2 Cold Temperature Cure - This is a version of that sets even faster than Epoxy.com Product#2 Chemical Resistant Coating Fast. Typically used in colder temperatures, or where an very fast cure is required.
  	Epoxy.com Product #15 Chemical Resistant Flooring Resin - a two component, seamless 100% solids epoxy resurfacing system with High Chemical Resistance. It may be applied as a coating, or combined with silica sand or Epoxy.com multi-colored quartz aggregate to produce a durable, easy to maintain floor, on both new and old surfaces.

• Novolac Epoxy - Highly Chemical Resistant

  • Epoxy.com Product #600 Flexible Novolac is a two-component, 100% solids epoxy coating based on multi-functional high performance flexibilized resin. PRODUCT #600 provides corrosion resistant protection to steel, other metals and concrete. It has excellent resistance to chemicals up to 300oF.  It is resistant to continuous immersion in water up to 212oF . PRODUCT #600 is formulated in a convenient 1 to 1 ratio, by volume mix ratio and has a long pot life to simplify application. PRODUCT #600 is more effective in applications which entail force curing.
  • Epoxy.com Product #630 Novolac Epoxy Mortar (98% Sulfuric Acid Resistant) - is a 100% solids epoxy Novolac ideal for harsh chemical and solvent resistant applications. It is ideal for use as a troweled mortar, slurry binder, and coating for concrete and steel in extremely corrosive areas where resistance to 98% sulfuric acid or other strong caustics is needed. It   is ideal for use as a protective coating for concrete and steel in the extremely corrosive areas of chemical plants and pulp mills secondary containment areas, water and waste treatment, and gas and electric utilities.
  • Epoxy.com Product #633 Epoxy Novolac Coating is a 100% solids epoxy Novolac coating ideal for harsh chemical and solvent resistant applications. It is used in secondary containment, solvent storage, pump pads, trenches, and other high exposure areas. It is ideal for use as a protective coating for concrete and steel in the extremely corrosive areas of chemical plants and pulp mills secondary containment areas, water and waste treatment, and gas and electric utilities. Product #633 is commonly used as a seal coat for Epoxy.com MORTAR SYSTEMS where chemical resistant performance is required. 
  • Product #634 Novolac High Temperature Epoxy  is a 100% solids amine cured epoxy Novolac that is solvent free. Suitable for immersion and non-immersion service particularly in aggressive acid and alkali environments with elevated temperatures.  Epoxy.com Product #634    produces a tough, chemical resistant coating on concrete, iron and non-iron surfaces. As a low viscosity epoxy Novolac it is suitable for hand or spray application. 
    
  • Epoxy.com Product #636 High Temp Chemical Resistant Primer/Topcoat -  a 100% solids amine cured epoxy Novolac that is solvent free. Specifically designed as a Methanol resistant coating. Product #636 is well suited for use in a wide array of aggressive acids, alkalies and organic solvents. It produces a tough, chemical resistant coating on concrete, iron and non-iron surfaces. As a low viscosity epoxy Novolac it is suitable for hand or spray application.
  • Product #637 High Temp Coating/Primer is a 100% solids amine cured epoxy Novolac that is solvent free. Suitable for immersion and non-immersion service particularly in aggressive acid environments.  Epoxy.com Product #637  produces a tough, chemical resistant coating on concrete, iron and non-iron surfaces. As a lower viscosity epoxy Novolac it is suitable as a primer or as a top coating. Excellent against 98% Sulfuric Acid.
  • Product #638 Glass Filled Novolac
  • Epoxy.com Product #640 Chemical & Heat Resistance is a two component; 100% solids brush, roll or airless spray applied coating designed to provide cavitation, corrosion and erosion resistance to concrete, metallic and nonmetallic surfaces. PRODUCT #640 acts as an inert barrier against extremely harsh environmental factors such as low and high PH, temperature extremes, dry and fluid particulate flow and corrosive chemical attack.
• Product #642 Multifunctional High Chemical Resistance Epoxy Coating/Bonder  is a two component, 100% solids, one coat trowel grade or grout pump applied protective coating designed to provide cavitation, erosion and corrosion resistance to metallic and non-metallic surfaces. Product Epoxy.com Product #642 acts as a barrier against extremely harsh environmental factors such as low and high PH, temperatures extremes, dry and fluid particulate flow and corrosive chemical attack.
• Epoxy.com Product#643    Highly Chemical Resistant Coating  is a solvent free, high functionality Novolac epoxy coating suitable for immersion and non-immersion service. Designed specifically as a Methanol resistant coating.  It is well suited for protection in a wide array of aggressive acids, alkalies and organic solvents. It produces a tough, chemical resistant coating on ferrous and non-ferrous metals and concrete.
• Product #647 High Temp Epoxy Coating and Mortar - is a two component highly cross-linked Novolac epoxy resin system. Epoxy.com Product #647 is especially formulated to be used as a high temperature potting or laminating resin. It is used to protect parts from high temperatures and corrosion. Epoxy.com Product #647 is 100% solids and has a convenient 2:1 by volume mix ratio and is easy to apply.
• Epoxy.com Product #648 Chemical Resistant Coating   is a two component high performance epoxy resin formulated with a convenient 1 to 1 mix ratio. Epoxy.com PRODUCT #648 Chemical Resistant Coating has been developed as a coating for exposure to organic acids and other severe chemical environments. It is used widely in the food and chemical industries for protection of concrete, wood, and steel. Epoxy.com PRODUCT #648 is suitable for application by brush, roller or spray. Where in-shop production techniques may be utilized and elevated temperature curing is feasible, rapid property development may be achieved by curing at 200 - 250°F (93 - 121°C). This will provide a cured film which may be handled within a relatively short period of time (about 4 hours). Elevated temperature curing will also enhance ultimate physical and chemical resistant properties.
• Epoxy.com Product #711 Novolac Adhesive - is protective coating designed to provide cavitation, erosion and corrosion resistance to metallic and non-metallic surfaces. Product #711 acts as a barrier against extremely harsh environmental factors such as low and high PH, temperatures extremes, dry and fluid particulate flow and corrosive chemical attack.   

• Vinyl Ester

  • Epoxy.com System #83 Vinyl Ester - use in a wide range of industrial applications. Epoxy.com VINYL ESTER SYSTEMS can be installed as a coating, slurry, or mortar to meet various chemical and heat resistance needs.
     

• Joints

  • Epoxy.com Product #63 EVA Expansion Joint -   a water-tight cross-linked closed-cell Ethylene Vinyl Acetate expanded foam material that exhibits unique properties when used in expansion contraction joints. ESI™ a water-tight cross-linked closed-cell Ethylene Vinyl Acetate expanded foam material that exhibits unique properties when used in expansion contraction joints. ESI™ Product #63 is water-tight and exhibits good chemical resistance properties to most mild non-oxidizing acids, alkalines and petroleum products.  
  • Epoxy.com Product #632 Novolac Control Joint Filler  is a 100% solids flexible Novolac epoxy Chemical Resistant joint filler for saw-cut joints of concrete slabs on grade.
    
  • Product #900 Polymeric Caulking- Gun Grade is a 2 part chemically cured elastomers. They provide a flexible and watertight seal between concrete, masonry, metals, glass, wood, and other construction materials.  Epoxy.com Product #900  (Gun Grade)/  Product #901  (Pourable) are mixed just prior to application. Color is light gray. (Other colors are available on special order.)
  • Product #901 Polymeric Joint Sealant - Pourable Grade is a 2 part chemically cured elastomers. They provide a flexible and watertight seal between concrete, masonry, metals, glass, wood, and other construction materials.  Epoxy.com Product #900  (Gun Grade)/  Product #901  (Pourable) are mixed just prior to application. Color is light gray. (Other colors are available on special order.)
  • Epoxy.com Product #913  a two-part, self leveling or gun-grade, polysulfide sealant  See Products Requiring Minimum Orders Page or use Epoxy.com Product #900 (Gun Grade) or Product #901 (Pourable)  or Product 964 (pourable with excellent chemical resistance) or Product #965 (gun grade with excellent chemical resistance).
  • Product #914 a two-part Polyurethane Sealant - See Products Requiring Minimum Orders Page or use Epoxy.com Product #954.
  • Epoxy.com Product #916 a two-component, low modulus, polyurea based joint sealant See Products Requiring Minimum Orders Page or use Product #900 (Gun Grade) or Product #901 (Pourable) .
  • Epoxy.com Product #917  Jet Fuel Resistant Polysulfide See Products Requiring Minimum Orders Page or use Product 964 (pourable with excellent chemical resistance) or Product #965 (gun grade with excellent chemical resistance) or Epoxy.com Product #954 Jet Fuel Resistant Urethane.
  • Epoxy.com 930 Polyurea  Rapid Curing Joint Sealant See Products Requiring Minimum Orders
  • Product #954 Joint Sealant is a two component extended polyurethane elastomer self-leveling joint sealant for joints in concrete, asphalt, or metal. When poured into a horizontal joint, Epoxy.com Product #954 is an excellent elastomeric joint sealer with "great memory". Epoxy.com Product #954 is also available for machine mixing.
  • Product #964 Polymeric Joint Sealant is a two-component chemically cured polysulfide sealant that provides excellent resistance to bioactivity and the harsh conditions encountered in wastewater treatment plants. Epoxy.com Product #964 Polymeric Joint Sealant cures to a flexible rubber that provides a watertight seal between concrete, masonry, metals, glass, wood, and other construction materials. Epoxy.com Product #964 is available in self-leveling.  Use Product #965 for a non-sag consistency.
  • Product #965 Polymeric Joint Sealant is a two-component chemically cured polysulfide sealant that provides excellent resistance to bioactivity and the harsh conditions encountered in wastewater treatment plants. Epoxy.com Product #965 Polymeric Joint Sealant cures to a flexible rubber that provides a watertight seal between concrete, masonry, metals, glass, wood, and other construction materials. Epoxy.com Product #965 is has a non-sag consistency. For a pourable consistency use Product #964.

High Temperature

In addition to the Products below, Most Novolac Epoxies are capable of withstanding up to 300 degrees F.

• Product #634 Novolac High Temperature Epoxy
• Product #636 High Temp Chemical Resistant Primer/Topcoat -  a 100% solids amine cured epoxy Novolac that is solvent free. Specifically designed as a Methanol resistant coating. Product #635 is well suited for use in a wide array of aggressive acids, alkalies and organic solvents. It produces a tough, chemical resistant coating on concrete, iron and non-iron surfaces. As a low viscosity epoxy Novolac it is suitable for hand or spray application.
• Product #637 High Temp Coating/Primer
• Product #640 Chemical & Heat Resistance
• Product #641 High Temp Epoxy  is a moisture-insensitive, two-component, 100% solids epoxy coating. It is especially formulated to protect concrete, steel and wood subject to high temperatures and corrosion.
• Product #641LV High Temp Resistant Mortar is a two component highly cross-linked novolac epoxy resin system. It is especially formulated to be used as a high temperature grouting or laminating resin. It is used to protect concrete, steel and other substrates from high temperatures and corrosion.
• Product #642 Multifunctional High Chemical Resistance Epoxy Coating/Bonder
• Product #644 High Temp Chemical Resistant Coating. Similar to 641LV, but with fillers to make it thicker.
• Product #645 High Temp Coating
• Product #706 Heat Resistant Bonder/Mortar is a 100% solids, moisture insensitive epoxy adhesive and repair material. When A and B Components are mixed they produce a gel consistency similar to petroleum jelly, which will not sag or run on a vertical or overhead surface application.
• Product #1800 Fast Setting Brushable Polyurea Coating is a two component brushable aliphatic polyurea. It cures in minutes to provide a tough chemical and abrasion resistant coating. This reaction is very fast, with typical working times of less than 15 minutes. PRODUCT #1800 is recommended for use in areas such as tanks, cooling tower linings, water and wastewater and waterproof deck coatings. It can be used in food and beverage cold storage areas, mechanical rooms, industrial plants, chemical and fertilizer plants, pulp and paper mills and petrochemical facilities.
• EpoxySystems’ PRODUCT #312 Aliphatic Sprayable Polyurea Coating is a two component sprayable aliphatic polyurea. It dries in seconds to provide a tough chemical and abrasion resistant coating. As an aliphatic polyurea, PRODUCT #312 is color fast and will resist yellowing from Ultra violet light exposure. Typical working times of one minute or less can be expected. This fast reaction requires a fast, efficient mixing technique so that the mixture can be applied within the short gel times. Impingement mixing from available two-component spray machinery is efficient and entirely adequate

Polyurea Coatings

• EpoxySystems’ PRODUCT #312 Aliphatic Sprayable Polyurea Coating is a two component sprayable aliphatic polyurea. It dries in seconds to provide a tough chemical and abrasion resistant coating. As an aliphatic polyurea, PRODUCT #312 is color fast and will resist yellowing from Ultra violet light exposure. Typical working times of one minute or less can be expected. This fast reaction requires a fast, efficient mixing technique so that the mixture can be applied within the short gel times. Impingement mixing from available two-component spray machinery is efficient and entirely adequate.
• Product #1800 Fast Setting Brushable Polyurea Coating is a two component brushable aliphatic polyurea. It cures in minutes to provide a tough chemical and abrasion resistant coating. This reaction is very fast, with typical working times of less than 15 minutes. PRODUCT #1800 is recommended for use in areas such as tanks, cooling tower linings, water and wastewater and waterproof deck coatings. It can be used in food and beverage cold storage areas, mechanical rooms, industrial plants, chemical and fertilizer plants, pulp and paper mills and petrochemical facilities.