Coating Installation GuideCoatings CalculatorSolvented CoatingsWater Based Epoxy CoatingsPolyurea_Coatings100% Solid Epoxy CoatingsAcrylic CoatingsSee alsoSolvented CoatingsProduct #210 Coal Tar Epoxy is a two component, 100% Solids coating especially formulated for high build applications. It produces a tough, flexible, chemical and impact resistant film. It is formulated to be easily spray applied as thick as 40 mils in 1 coat. It provides excellent resistance to aggressive water, acids, and caustics. Suitable for intermittent exposure to 300 degrees F. Product #215LVOC- a high solids epoxy, chemical curing, quick- drying resin system. Product #215 produces a ceramic like coating on masonry, concrete plaster, cement, asbestos board, wood, fiberglass, metal and most other rigid materials. Formulated for applications that require superior adhesion and durability, chemical resistance, corrosive protection, quick cure and easy cleaning. PRODUCT #674 - Electrostatic Dissipative Urethane Coating is a two component, Electro Static Dissipative chemical resistant, polyurethane coating. The high gloss finish offers excellent abrasion resistance, chemical and stain resistance, and superior color retention. Epoxy.com PRODUCT #674 can be used equally well on vertical or horizontal surfaces. It is ideal for concrete floors and walls in warehouses, storage facilities, aircraft hangars, animal housing, and vehicle maintenance facilities. Available in both clear and pigmented formulations, Epoxy.com PRODUCT #674 is used as a finish coating option for most Epoxy.com Flooring Systems. Water Based Epoxy CoatingsProduct #222 Water Based Epoxy - Epoxy.com Product #222 WATER BASED EPOXY COATING is a two component 100% reactive water based multifunctional epoxy resin coating. Product #222 is manufactured to produce the utmost in performance in a safe, water borne coating. Product #222 provides excellent resistance to salt intrusion, and excellent adhesion to most common construction substrates. Product #675 Electrostatic Dissipating Water Borne Epoxy Topcoat-a pigmented, water emulsion epoxy electro-static dissipative finish designed to have maximum penetration into concrete surfaces to provide high bond strength and adhesion. It has very low odor and can be used in occupied areas as a finish sealer in Thin-Film Electro-Static Dissipative Coating Systems. Polyurea CoatingsEpoxy.com PRODUCT #312 Aliphatic Sprayable Polyurea Coating is a two component sprayable aliphatic polyurea. It dries in seconds to provide a tough chemical and abrasion resistant coating. As an aliphatic polyurea, PRODUCT #312 is color fast and will resist yellowing from Ultra violet light exposure. Typical working times of one minute or less can be expected. This fast reaction requires a fast, efficient mixing technique so that the mixture can be applied within the short gel times. Impingement mixing from available two-component spray machinery is efficient and entirely adequate. Product #1800 Fast Setting Brushable Polyurea Coating is a two component brushable aliphatic polyurea. It cures in minutes to provide a tough chemical and abrasion resistant coating. This reaction is very fast, with typical working times of less than 15 minutes. PRODUCT #1800 is recommended for use in areas such as tanks, cooling tower linings, water and wastewater and waterproof deck coatings. It can be used in food and beverage cold storage areas, mechanical rooms, industrial plants, chemical and fertilizer plants, pulp and paper mills and petrochemical facilities. 100% Solid Epoxy CoatingsProduct #1 All Purpose Coating - a 100% solids epoxy Hi-Build epoxy coating used for high foot and light forklift traffic areas where abrasion resistance is required; for protection against mild corrosion; and as a decorative waterproof coating for walls, floors, tanks, etc Available in normal, fast, and Cold Temperature Cure versions. Product #1Fast - Shorter Potlife, and faster setting version of Product #1 Product #1Cold Temperature Cure - This is a version of Product #1 that sets even faster than Product#1 Fast. Typically used in colder temperatures, or where an very fast cure is required. Product #1W a two component, 100% solids epoxy Hi-Build epoxy coating used for high indoor traffic areas where abrasion resistance is required; for protection against mild corrosion; and as a decorative waterproof coating for walls, tanks, etc. Product #2 Chemical Resistant Coating - a two component, 100% solids epoxy chemical resistant coating used to protect chemical concrete, steel and other structural materials from non-oxidizing acids and alkalines for both interior and exterior applications. Available in normal, fast, and Cold Temperature Cure. Product #2 Fast - Shorter Potlife, and faster setting version of Product #2 Product #2 Cold Temperature Cure - This is a version of that sets even faster than Product#2 Fast. Typically used in colder temperatures, or where an very fast cure is required. Product #2W a two component, 100% solids epoxy chemical resistant coating used to protect chemical concrete, steel and other structural materials from non-oxidizing acids and alkalines for both interior and exterior applications. Product #204 Cold Temperature Cure Polymeric Coating - is a specially formulated coating for cold temperature applications. Able to cure at temperatures as low as 35°F. It is often used in coolers and food preparation areas that require constant low temperatures. It is also frequently used in room temperature applications to meet super-fast cure, limited shutdown needs. Product #210 Coal Tar Epoxy is a two component, 100% Solids coating especially formulated for high build applications. It produces a tough, flexible, chemical and impact resistant film. It is formulated to be easily spray applied as thick as 40 mils in 1 coat. It provides excellent resistance to aggressive water, acids, and caustics. Suitable for intermittent exposure to 300 degrees F. Product #214 Tabletop Resin - an all-purpose, low viscosity Epoxy System for coating wooden counter tops, tabletops, bar tops and similar applications. It forms a glossy, hard surface, which is resistant to stains. It has excellent clarity and color retention. It is essentially odorless and can therefore be used in occupied areas Product #220 Rebar Touch Up Epoxy Coating is a two component, 70% solids epoxy coating specially manufactured to touch up damage epoxy coated rebar or to coat rebars not previously protected against corrosion. Product #226Fast Setting Water Based Epoxy is a Fast Setting Water Based Epoxy Coating is a two component, 100% reactive, water based, multi functional epoxy resin coating. PRODUCT #226 is manufactured to produce the utmost in performance in a safe, water borne coating. PRODUCT #226 provides excellent resistance to salt intrusion, and excellent adhesion to most common construction substrates. Product #226 is VOC Compliant, Fast Curing, and tintable with standard colorants. It is Internally Flexibilized so it can be applied to metals and plastics. It is water-reducible and easily applied. Product #250 Water Tank Type Coating is a 100% solids, moisture- insensitive epoxy coating, containing no solvents. It is mixed at a 2:1 ratio, produces a tough, chemical and abrasion-resistant coating for dry or damp concrete, wood or steel surfaces. Not NSF approved for use in Drinking Water. For NSF approval see www.nsf.org. Product #255 Mastic High Build Epoxy Coating is a 100% solids, moisture-insensitive, epoxy resin system. When mixed at a 1:1 ratio, by volume, it produces an excellent coating for dry or damp concrete, wood or steel surfaces. It iss used on piles, piers, and concrete or steel tanks where concrete or steel needs to be protected from abrasive environments. Product #600 Flexible Novolac Product #630 Novolac Coating/Mortar Binder Product #632 Novolac Control Joint Filler is a 100% solids flexible Novolac epoxy Chemical Resistant joint filler for saw-cut joints of concrete slabs on grade. Product #633 Novolac Coating Product #634 Novolac High Temperature Epoxy Product #635 Novolac Coating/Mortar Binder Product #636 High Temp Chemical Resistant Primer/Topcoat - a 100% solids amine cured epoxy Novolac that is solvent free. Specifically designed as a Methanol resistant coating. Product #635 is well suited for use in a wide array of aggressive acids, alkalies and organic solvents. It produces a tough, chemical resistant coating on concrete, iron and non-iron surfaces. As a low viscosity epoxy Novolac it is suitable for hand or spray application. Product #637 High Temp Coating/Primer Product #638 Glass Filled Novolac Product #640 Chemical & Heat Resistance Product #641 High Temp Epoxy is a moisture-insensitive, two-component, 100% solids epoxy coating. It is especially formulated to protect concrete, steel and wood subject to high temperatures and corrosion. Product #641LV High Temp Resistant Mortar is a two component highly cross-linked novolac epoxy resin system. It is especially formulated to be used as a high temperature grouting or laminating resin. It is used to protect concrete, steel and other substrates from high temperatures and corrosion. Product #642 Multifunctional High Chemical Resistance Epoxy Coating/Bonder is a two component, 100% solids, one coat trowel grade or grout pump applied protective coating designed to provide cavitation, erosion and corrosion resistance to metallic and non-metallic surfaces. Product #642 acts as a barrier against extremely harsh environmental factors such as low and high PH, temperatures extremes, dry and fluid particulate flow and corrosive chemical attack. PRODUCT #643 Highly Chemical Resistant Coating is a solvent free, high functionality Novolac epoxy coating suitable for immersion and non-immersion service. Designed specifically as a Methanol resistant coating. It is well suited for protection in a wide array of aggressive acids, alkalies and organic solvents. It produces a tough, chemical resistant coating on ferrous and non-ferrous metals and concrete. Product #644 High Temp Chemical Resistant Coating. Similar to 641LV, but with fillers to make it thicker. Product #645 High Temp Coating 648 Chemical Resistant Coating is a two component high performance epoxy resin formulated with a convenient 1 to 1 mix ratio. Epoxy.com PRODUCT #648 Chemical Resistant Coating has been developed as a coating for exposure to organic acids and other severe chemical environments. It is used widely in the food and chemical industries for protection of concrete, wood, and steel. Epoxy.com PRODUCT #648 is suitable for application by brush, roller or spray. Where in-shop production techniques may be utilized and elevated temperature curing is feasible, rapid property development may be achieved by curing at 200 - 250°F (93 - 121°C). This will provide a cured film which may be handled within a relatively short period of time (about 4 hours). Elevated temperature curing will also enhance ultimate physical and chemical resistant properties. Product #650 Resurfacing Grade Epoxy is a two-component, 100% solids, brushable ceramic, reinforced polymeric compound which has outstanding wear-resistance against abrasion, erosion/corrosion and cavitation in a fluid-flow environment. Product #671 Conductive Primer/Sealer - Epoxy.com Product #671 is a low viscosity, two component, carbon filled, polyamide modified conductive primer/sealer formulated with special wetting agents to provide maximum penetration into concrete surfaces. Product #671 is ideal for both new and old concrete surfaces. Product #671 provides excellent resistance to wear, and can be used either alone or as a conductive sealer or as a conductive primer when used with Epoxy.com product #674 Electro-Static Dissipating Urethane Topcoat and Epoxy.com Conductive Systems. Acrylic CoatingsNone at this time. See Sealers Elastomeric Coatings and MembranesEpoxy.com has a wide variety of elastomeric (flexible) systems for many applications. These elastomeric systems may be made from epoxy, high tech polyurethanes, or other materials. The elastomeric properties may be required for many reasons. Some of these reasons are: waterproofing, joint filling, mechanical and thermal shock absorption.
Product #401 Urethane Coating - a two (2) component, high-solids, urethane coating. Urethane Coating is a two (2) component, high-solids, urethane coating. It is a superior coating that provides the ultimate in weather resistance. It offers outstanding abrasion resistance, excellent chemical resistance and color retention in severe conditions. Product #402 Urethane - a two component1 chemical resistant polyurethane coating. The high gloss finish offers excellent abrasion resistance, chemical and stain resistance, and color retention. It used equally well on vertical or horizontal surfaces. It is ideal for concrete floors and walls in warehouses, storage facilities, aircraft hangers, animal housing, and vehicle maintenance facilities. 409 Traffic Bearing Membrane is a Resilient Traffic Bearing Membrane is a 100% solids, ambient cure impermeable elastomer. PRODUCT #409 is resistant to moisture, oils, mild acids, gasoline, and alkalies. PRODUCT #409 when applied to concrete or other surfaces, is resilient and accommodates movement in concrete substrates. PRODUCT #409 is used as a traffic bearing membrane or non-skid coating that retains color and physical properties when exposed to harsh UV conditions. Product #410 Urethane Traffic Bearing Membrane System is a tough, resilient system with excellent elongation. It is applied as a 3-step system - consisting of a primer, traffic bearing membrane - 2 coats, and sealer. It cures at ambient temperatures and is impermeable to moisture, oils, mild adds, gasoline, and alkalies. Product #440 Light Stable Deck Membrane Flex Epoxy- Epoxy Membrane - a flexible resin used as an epoxy membrane and as a flexible epoxy mortar. It is a two component, 100% solids epoxy used as a base in many Flexible Epoxy Floor and Mortar Systems. It resists cracking caused by horizontal substrate movement, providing a crack resistant, resilient, sound absorbent, waterproof, durable floor. It offers stress-relieving properties for floor slabs that show movement or vibration. It is excellent for use in areas such as mechanical equipment rooms, large animal rooms and activity centers. See also:
|
|
Proper mixing and installation is critical to the optimal success of all product. See Installation Tips, Techdata, & MSDS for more details on our products. Be sure to contact us with any questions and/or concerns that you have. For more information please contact: Epoxy.com Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time). 321-206-1833 Customer Service - Ordering and Order Status 714-657-3826 Technical Support 352-489-1625 Fax line to all Departments Website: www.epoxy.com 24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253
Copyright © 1994-2010 EPOXY.COM a division of Epoxy Systems, Inc. - Florida and Vermont. All rights reserved. Unless other wise agreed upon in writing, buyer is responsible for the cost of shipping. This information is presented in good faith to assist in determining whether this product is suitable for application. No warranty or representation, however, is intended or made, nor is protection from any law or patent to be inferred, and all patent rights reserved. Epoxy.com a division of Epoxy Systems, Inc. warrants its products (when properly stored) for the period of time as follows: Epoxies, Product #315, Product #315BC, and Product #316 one (1) year; Polyesters, Methyl Methacrylates (normal) two (2) months and Polyurethanes Four (4) months; Power Tools and Equipment 90 days; Vinyl Esters, High Molecular Weight Methacrylates (HMMA) and all other resins (not specifically mentioned above) 30 days; hand tools (non-power tools) 30 days. Epoxy.com warrants that its products will be free of manufacturing defects and will be in conformity with published specifications when handled, stored, mixed and applied in accordance with recommendations of Epoxy.com. If any product fails to meet this warranty, the liability of Epoxy.com will be limited to replacement of any non-conforming material if notice of such non-conformity is given to Epoxy.com within the warranty period for the material (as indicated above), or within 1 year of the delivery of materials (whichever is sooner). Epoxy.com may in its discretion refund the price received by Epoxy.com in lieu of replacing the material. No customer, distributor, or representative of Epoxy.com is authorized to change or modify the published specifications of this warranty in any way. No one is authorized to make oral warranties on behalf of Epoxy.com. In order to obtain replacement or refund the customer must provide written notice containing full details of the non-conformity. Epoxy.com reserves the right to inspect the non-conforming material prior to replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. Epoxy.com 'S OBLIGATION SHALL NOT EXTEND BEYOND THE OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND Epoxy.com SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All quotes and sales subject to availability. Many of our products are made on an individual order basis. Unless authorized in writing by Epoxy.com a division of Epoxy Systems, Inc. in writing before the material is made, there are no returns on items purchased from us, once the order has been processed, and the material made. In the event of authorized returns a restocking charge will be charged in the amount of 30% of the value of the material returned or $150 whichever is greater. No returns on non-list priced items. All Returns are for merchandise (store) credit only, no cash or credit card credits. In the event of a return, buyer is responsible for the cost of shipping and handling in both directions.
[Home] [Catalog of Products]
[Where to Start] [[Bonding Systems]
[Chip Floors] [Chemical Resistance]
|
