|
Epoxy.com™ Vinyl Ester Systems
DESCRIPTION Epoxy.com ™ VINYL ESTER SYSTEMS utilize
Epoxy.com ™ 100% solids vinyl ester resin in a wide range of industrial applications. Epoxy.com ™ VINYL ESTER SYSTEMS can be installed as a coating, slurry, or mortar to
meet various chemical and heat resistance needs. Epoxy.com ™ VINYL ESTER SYSTEMS, when
installed as aggregate-filled mortar, can also include Epoxy.com WATERPROOFING MEMBRANES to
produce waterproof, crack resistant systems. Consult with Epoxy.com ™ Technical Support for
specific design information. An integral cove base can be installed in areas requiring
seamless wall to floor coatings. Epoxy.com VINYL ESTER SYSTEMS provide outstanding chemical
resistance in many applications. Consult the Chemical Resistance Guide, and/or
Epoxy.com ™
Technical Support for further information. Epoxy.com VINYL ESTER COATING
Epoxy.com VINYL ESTER SLURRY
Epoxy.com VINYL ESTER TROWELED SURFACING
CHEMICAL RESISTANCE
R Recommended for continuous service L - Limited recommendation, occasional spills This chart is intended as an aid in evaluating the performance of these systems in various chemical exposures. The data is intended as a guide only. Some chemicals, such as strong oxidizing acids (nitric or chromic) may leave surface stains in the finished system. This is a surface blemish and does not cause system failure. In severe or combination exposures, a sample should be tested under simulated use conditions. Product data is revised as needed to reflect the most recent technology and field experience. Consult Epoxy.com ™ (Epoxy System Inc.) for current printing of literature and updated chemical resistance information COMPOSITION Epoxy.com VINYL ESTER SYSTEMS are composed of 100% solids
vinyl ester resins filled with a variety of graded quartz, silica, or ceramic fillers
which can be modified to create the best design mix for ideal performance. ADVANTAGES Epoxy.com VINYL ESTER SYSTEMS are the standard for heavy duty flooring systems protecting the substrate from extreme chemical exposure, impact, abrasion, and severe thermal shock. Advantages include:
CONSIDERATIONS
COLOR SELECTION Epoxy.com VINYL ESTER SYSTEMS are available in Grey or
Brick Red. Custom colors are available subject to laboratory approvals, minimum
quantities, lead time for production and increased cost. APPLICATION PROCEDURES Surface Preparation Surfaces must be clean and sound. Remove all dirt, laitance,
grease, curing compounds and other foreign matter by sandblasting, or mechanical abrasion.
Remove water and dust from all surfaces with an oil-free air blast immediately prior to
application of compound. Installation Installation procedures on all Epoxy.com VINYL ESTER SYSTEMS
are to be followed without exception. These include subfloor preparation and
prime, body, and finish coat application as specified. Specific procedures
depend on the type of system chosen Epoxy.com VINYL ESTER SYSTEMS require multiple coats and skilled installers
approved by Epoxy.com. SAFETY PRECAUTIONS
Prolonged or repeated exposure may cause eye or skin irritation.
If contact occurs, wash immediately and seek medical help. Use safety glasses with
side shields and wear protective rubber or polyethylene gloves. See MSDS on the material
for more details and precautions before using. MAINTENANCE Epoxy.com VINYL ESTER SYSTEMS must be allowed to properly
cure for maximum resistance. Newly installed systems must be cured a minimum of 18 to 24
hours before wash-down. Seven days are normal curing times for maximum resistance. Regulated spill wash-down and removal will prolong
service life of Epoxy.com VINYL ESTER SYSTEMS. Epoxy.com VINYL ESTER SYSTEMS are not self
cleaning or non-staining. PHYSICAL PROPERTIES
PERFORMANCE PROPERTIES
|
|
Proper mixing and installation is critical to the optimal success of all product. See Installation Tips, Techdata, & MSDS for more details on our products. Be sure to contact us with any questions and/or concerns that you have. For more information please contact: Epoxy.com Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time). 321-206-1833 Customer Service - Ordering and Order Status 714-657-3826 Technical Support 352-489-1625 Fax line to all Departments Website: www.epoxy.com 24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253
Copyright © 1994-2010 EPOXY.COM a division of Epoxy Systems, Inc. - Florida and Vermont. All rights reserved. Unless other wise agreed upon in writing, buyer is responsible for the cost of shipping. This information is presented in good faith to assist in determining whether this product is suitable for application. No warranty or representation, however, is intended or made, nor is protection from any law or patent to be inferred, and all patent rights reserved. Epoxy.com a division of Epoxy Systems, Inc. warrants its products (when properly stored) for the period of time as follows: Epoxies, Product #315, Product #315BC, and Product #316 one (1) year; Polyesters, Methyl Methacrylates (normal) two (2) months and Polyurethanes Four (4) months; Power Tools and Equipment 90 days; Vinyl Esters, High Molecular Weight Methacrylates (HMMA) and all other resins (not specifically mentioned above) 30 days; hand tools (non-power tools) 30 days. Epoxy.com warrants that its products will be free of manufacturing defects and will be in conformity with published specifications when handled, stored, mixed and applied in accordance with recommendations of Epoxy.com. If any product fails to meet this warranty, the liability of Epoxy.com will be limited to replacement of any non-conforming material if notice of such non-conformity is given to Epoxy.com within the warranty period for the material (as indicated above), or within 1 year of the delivery of materials (whichever is sooner). Epoxy.com may in its discretion refund the price received by Epoxy.com in lieu of replacing the material. No customer, distributor, or representative of Epoxy.com is authorized to change or modify the published specifications of this warranty in any way. No one is authorized to make oral warranties on behalf of Epoxy.com. In order to obtain replacement or refund the customer must provide written notice containing full details of the non-conformity. Epoxy.com reserves the right to inspect the non-conforming material prior to replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. Epoxy.com 'S OBLIGATION SHALL NOT EXTEND BEYOND THE OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND Epoxy.com SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All quotes and sales subject to availability. Many of our products are made on an individual order basis. Unless authorized in writing by Epoxy.com a division of Epoxy Systems, Inc. in writing before the material is made, there are no returns on items purchased from us, once the order has been processed, and the material made. In the event of authorized returns a restocking charge will be charged in the amount of 30% of the value of the material returned or $150 whichever is greater. No returns on non-list priced items. All Returns are for merchandise (store) credit only, no cash or credit card credits. In the event of a return, buyer is responsible for the cost of shipping and handling in both directions.
[Home] [Catalog of Products]
[Where to Start] [[Bonding Systems]
[Chip Floors] [Chemical Resistance]
|
